CSC

 
 
Tehdyt toimenpiteet
EMBOSS: trimest
trimest

 

Wiki

The master copies of EMBOSS documentation are available at http://emboss.open-bio.org/wiki/Appdocs on the EMBOSS Wiki.

Please help by correcting and extending the Wiki pages.

Function

Remove poly-A tails from nucleotide sequences

Description

trimest reads one or more nucleotide sequences and writes them out again but with any 3' poly-A tail (or, optionally, 5' poly-T tail) removed. It detect any poly-A and poly-T tails in the input sequences that are at least the specified minimum length. The tails may continue a defined num of non-A or non-T bases. If both a 5' poly-T tail and a 3' poly-A tail is identified, it removes the longest of the two. The output is a set of sequences with the poly-A (or poly-T) tails removed. If a sequence had a 5' poly-T tail then the resulting sequence is reverse-complemented by default. The description line has a comment appended about the changes made to the sequence.

Algorithm

trimest looks for a repeat of at least -minlength A's at the 3' end (and, by default, -minlength T's at the 5' end). If there are an apparent 5' poly-T tail and a poly-A tail, then it removes whichever is the longer of the two.

By default, it will allow -mismatches non-A (or non-T) bases in the tail. If a mismatch is found, then there has to be at least -minlength A's (or T's) past the mismatch (working from the end) for the mismatch to be considered part of the tail. If -mismatches is greater than 1 then that number of contiguous non-A (or non-T) bases will be allowed as part of the tail.

Usage

Here is a sample session with trimest


% trimest tembl:x65923 x65923.seq 
Remove poly-A tails from nucleotide sequences

Go to the input files for this example
Go to the output files for this example

Command line arguments

Remove poly-A tails from nucleotide sequences
Version: EMBOSS:6.4.0.0

   Standard (Mandatory) qualifiers:
  [-sequence]          seqall     Nucleotide sequence(s) filename and optional
                                  format, or reference (input USA)
  [-outseq]            seqoutall  [.] Sequence set(s)
                                  filename and optional format (output USA)

   Additional (Optional) qualifiers:
   -minlength          integer    [4] This is the minimum length that a poly-A
                                  (or poly-T) tail must have before it is
                                  removed. If there are mismatches in the tail
                                  than there must be at least this length of
                                  poly-A tail before the mismatch for the
                                  mismatch to be considered part of the tail.
                                  (Integer 1 or more)
   -mismatches         integer    [1] If there are this number or fewer
                                  contiguous non-A bases in a poly-A tail
                                  then, if there are '-minlength' 'A' bases
                                  before them, they will be considered part of
                                  the tail and removed .
                                  For example the terminal 4 A's of GCAGAAAA
                                  would be removed with the default values of
                                  -minlength=4 and -mismatches=1 (There are
                                  not at least 4 A's before the last 'G' and
                                  so only the A's after it are considered to
                                  be part of the tail). The terminal 9 bases
                                  of GCAAAAGAAAA would be removed; There are
                                  at least -minlength A's preceeding the last
                                  'G', so it is part of the tail. (Integer 0
                                  or more)
   -[no]reverse        boolean    [Y] When a poly-T region at the 5' end of
                                  the sequence is found and removed, it is
                                  likely that the sequence is in the reverse
                                  sense. This option will change the sequence
                                  to the forward sense when it is written out.
                                  If this option is not set, then the sense
                                  will not be changed.
   -tolower            toggle     [N] The poly-A region can be 'masked' by
                                  converting the sequence characters to
                                  lower-case. Some non-EMBOSS programs e.g.
                                  fasta can interpret this as a masked region.
                                  The sequence is unchanged apart from the
                                  case change. You might like to ensure that
                                  the whole sequence is in upper-case before
                                  masking the specified regions to lower-case
                                  by using the '-supper' sequence qualifier.

   Advanced (Unprompted) qualifiers:
   -[no]fiveprime      boolean    [Y] If this is set true, then the 5' end of
                                  the sequence is inspected for poly-T tails.
                                  These will be removed if they are longer
                                  than any 3' poly-A tails. If this is false,
                                  then the 5' end is ignored.

   Associated qualifiers:

   "-sequence" associated qualifiers
   -sbegin1            integer    Start of each sequence to be used
   -send1              integer    End of each sequence to be used
   -sreverse1          boolean    Reverse (if DNA)
   -sask1              boolean    Ask for begin/end/reverse
   -snucleotide1       boolean    Sequence is nucleotide
   -sprotein1          boolean    Sequence is protein
   -slower1            boolean    Make lower case
   -supper1            boolean    Make upper case
   -sformat1           string     Input sequence format
   -sdbname1           string     Database name
   -sid1               string     Entryname
   -ufo1               string     UFO features
   -fformat1           string     Features format
   -fopenfile1         string     Features file name

   "-outseq" associated qualifiers
   -osformat2          string     Output seq format
   -osextension2       string     File name extension
   -osname2            string     Base file name
   -osdirectory2       string     Output directory
   -osdbname2          string     Database name to add
   -ossingle2          boolean    Separate file for each entry
   -oufo2              string     UFO features
   -offormat2          string     Features format
   -ofname2            string     Features file name
   -ofdirectory2       string     Output directory

   General qualifiers:
   -auto               boolean    Turn off prompts
   -stdout             boolean    Write first file to standard output
   -filter             boolean    Read first file from standard input, write
                                  first file to standard output
   -options            boolean    Prompt for standard and additional values
   -debug              boolean    Write debug output to program.dbg
   -verbose            boolean    Report some/full command line options
   -help               boolean    Report command line options and exit. More
                                  information on associated and general
                                  qualifiers can be found with -help -verbose
   -warning            boolean    Report warnings
   -error              boolean    Report errors
   -fatal              boolean    Report fatal errors
   -die                boolean    Report dying program messages
   -version            boolean    Report version number and exit

Qualifier Type Description Allowed values Default
Standard (Mandatory) qualifiers
[-sequence]
(Parameter 1)
seqall Nucleotide sequence(s) filename and optional format, or reference (input USA) Readable sequence(s) Required
[-outseq]
(Parameter 2)
seqoutall Sequence set(s) filename and optional format (output USA) Writeable sequence(s) <*>.format
Additional (Optional) qualifiers
-minlength integer This is the minimum length that a poly-A (or poly-T) tail must have before it is removed. If there are mismatches in the tail than there must be at least this length of poly-A tail before the mismatch for the mismatch to be considered part of the tail. Integer 1 or more 4
-mismatches integer If there are this number or fewer contiguous non-A bases in a poly-A tail then, if there are '-minlength' 'A' bases before them, they will be considered part of the tail and removed . For example the terminal 4 A's of GCAGAAAA would be removed with the default values of -minlength=4 and -mismatches=1 (There are not at least 4 A's before the last 'G' and so only the A's after it are considered to be part of the tail). The terminal 9 bases of GCAAAAGAAAA would be removed; There are at least -minlength A's preceeding the last 'G', so it is part of the tail. Integer 0 or more 1
-[no]reverse boolean When a poly-T region at the 5' end of the sequence is found and removed, it is likely that the sequence is in the reverse sense. This option will change the sequence to the forward sense when it is written out. If this option is not set, then the sense will not be changed. Boolean value Yes/No Yes
-tolower toggle The poly-A region can be 'masked' by converting the sequence characters to lower-case. Some non-EMBOSS programs e.g. fasta can interpret this as a masked region. The sequence is unchanged apart from the case change. You might like to ensure that the whole sequence is in upper-case before masking the specified regions to lower-case by using the '-supper' sequence qualifier. Toggle value Yes/No No
Advanced (Unprompted) qualifiers
-[no]fiveprime boolean If this is set true, then the 5' end of the sequence is inspected for poly-T tails. These will be removed if they are longer than any 3' poly-A tails. If this is false, then the 5' end is ignored. Boolean value Yes/No Yes
Associated qualifiers
"-sequence" associated seqall qualifiers
-sbegin1
-sbegin_sequence
integer Start of each sequence to be used Any integer value 0
-send1
-send_sequence
integer End of each sequence to be used Any integer value 0
-sreverse1
-sreverse_sequence
boolean Reverse (if DNA) Boolean value Yes/No N
-sask1
-sask_sequence
boolean Ask for begin/end/reverse Boolean value Yes/No N
-snucleotide1
-snucleotide_sequence
boolean Sequence is nucleotide Boolean value Yes/No N
-sprotein1
-sprotein_sequence
boolean Sequence is protein Boolean value Yes/No N
-slower1
-slower_sequence
boolean Make lower case Boolean value Yes/No N
-supper1
-supper_sequence
boolean Make upper case Boolean value Yes/No N
-sformat1
-sformat_sequence
string Input sequence format Any string  
-sdbname1
-sdbname_sequence
string Database name Any string  
-sid1
-sid_sequence
string Entryname Any string  
-ufo1
-ufo_sequence
string UFO features Any string  
-fformat1
-fformat_sequence
string Features format Any string  
-fopenfile1
-fopenfile_sequence
string Features file name Any string  
"-outseq" associated seqoutall qualifiers
-osformat2
-osformat_outseq
string Output seq format Any string  
-osextension2
-osextension_outseq
string File name extension Any string  
-osname2
-osname_outseq
string Base file name Any string  
-osdirectory2
-osdirectory_outseq
string Output directory Any string  
-osdbname2
-osdbname_outseq
string Database name to add Any string  
-ossingle2
-ossingle_outseq
boolean Separate file for each entry Boolean value Yes/No N
-oufo2
-oufo_outseq
string UFO features Any string  
-offormat2
-offormat_outseq
string Features format Any string  
-ofname2
-ofname_outseq
string Features file name Any string  
-ofdirectory2
-ofdirectory_outseq
string Output directory Any string  
General qualifiers
-auto boolean Turn off prompts Boolean value Yes/No N
-stdout boolean Write first file to standard output Boolean value Yes/No N
-filter boolean Read first file from standard input, write first file to standard output Boolean value Yes/No N
-options boolean Prompt for standard and additional values Boolean value Yes/No N
-debug boolean Write debug output to program.dbg Boolean value Yes/No N
-verbose boolean Report some/full command line options Boolean value Yes/No Y
-help boolean Report command line options and exit. More information on associated and general qualifiers can be found with -help -verbose Boolean value Yes/No N
-warning boolean Report warnings Boolean value Yes/No Y
-error boolean Report errors Boolean value Yes/No Y
-fatal boolean Report fatal errors Boolean value Yes/No Y
-die boolean Report dying program messages Boolean value Yes/No Y
-version boolean Report version number and exit Boolean value Yes/No N

Input file format

trimest reads the USA of one or more normal nucleic acid sequences.

Input files for usage example

'tembl:x65923' is a sequence entry in the example nucleic acid database 'tembl'

Database entry: tembl:x65923

ID   X65923; SV 1; linear; mRNA; STD; HUM; 518 BP.
XX
AC   X65923;
XX
DT   13-MAY-1992 (Rel. 31, Created)
DT   18-APR-2005 (Rel. 83, Last updated, Version 11)
XX
DE   H.sapiens fau mRNA
XX
KW   fau gene.
XX
OS   Homo sapiens (human)
OC   Eukaryota; Metazoa; Chordata; Craniata; Vertebrata; Euteleostomi; Mammalia;
OC   Eutheria; Euarchontoglires; Primates; Haplorrhini; Catarrhini; Hominidae;
OC   Homo.
XX
RN   [1]
RP   1-518
RA   Michiels L.M.R.;
RT   ;
RL   Submitted (29-APR-1992) to the EMBL/GenBank/DDBJ databases.
RL   L.M.R. Michiels, University of Antwerp, Dept of Biochemistry,
RL   Universiteisplein 1, 2610 Wilrijk, BELGIUM
XX
RN   [2]
RP   1-518
RX   PUBMED; 8395683.
RA   Michiels L., Van der Rauwelaert E., Van Hasselt F., Kas K., Merregaert J.;
RT   "fau cDNA encodes a ubiquitin-like-S30 fusion protein and is expressed as
RT   an antisense sequence in the Finkel-Biskis-Reilly murine sarcoma virus";
RL   Oncogene 8(9):2537-2546(1993).
XX
DR   H-InvDB; HIT000322806.
XX
FH   Key             Location/Qualifiers
FH
FT   source          1..518
FT                   /organism="Homo sapiens"
FT                   /chromosome="11q"
FT                   /map="13"
FT                   /mol_type="mRNA"
FT                   /clone_lib="cDNA"
FT                   /clone="pUIA 631"
FT                   /tissue_type="placenta"
FT                   /db_xref="taxon:9606"
FT   misc_feature    57..278
FT                   /note="ubiquitin like part"
FT   CDS             57..458
FT                   /gene="fau"
FT                   /db_xref="GDB:135476"
FT                   /db_xref="GOA:P35544"
FT                   /db_xref="GOA:P62861"
FT                   /db_xref="HGNC:3597"
FT                   /db_xref="InterPro:IPR000626"
FT                   /db_xref="InterPro:IPR006846"
FT                   /db_xref="InterPro:IPR019954"
FT                   /db_xref="InterPro:IPR019955"
FT                   /db_xref="InterPro:IPR019956"
FT                   /db_xref="UniProtKB/Swiss-Prot:P35544"
FT                   /db_xref="UniProtKB/Swiss-Prot:P62861"
FT                   /protein_id="CAA46716.1"
FT                   /translation="MQLFVRAQELHTFEVTGQETVAQIKAHVASLEGIAPEDQVVLLAG
FT                   APLEDEATLGQCGVEALTTLEVAGRMLGGKVHGSLARAGKVRGQTPKVAKQEKKKKKTG
FT                   RAKRRMQYNRRFVNVVPTFGKKKGPNANS"
FT   misc_feature    98..102
FT                   /note="nucleolar localization signal"
FT   misc_feature    279..458
FT                   /note="S30 part"
FT   polyA_signal    484..489
FT   polyA_site      509
XX
SQ   Sequence 518 BP; 125 A; 139 C; 148 G; 106 T; 0 other;
     ttcctctttc tcgactccat cttcgcggta gctgggaccg ccgttcagtc gccaatatgc        60
     agctctttgt ccgcgcccag gagctacaca ccttcgaggt gaccggccag gaaacggtcg       120
     cccagatcaa ggctcatgta gcctcactgg agggcattgc cccggaagat caagtcgtgc       180
     tcctggcagg cgcgcccctg gaggatgagg ccactctggg ccagtgcggg gtggaggccc       240
     tgactaccct ggaagtagca ggccgcatgc ttggaggtaa agttcatggt tccctggccc       300
     gtgctggaaa agtgagaggt cagactccta aggtggccaa acaggagaag aagaagaaga       360
     agacaggtcg ggctaagcgg cggatgcagt acaaccggcg ctttgtcaac gttgtgccca       420
     cctttggcaa gaagaagggc cccaatgcca actcttaagt cttttgtaat tctggctttc       480
     tctaataaaa aagccactta gttcagtcaa aaaaaaaa                               518
//

Output file format

If a poly-A tail is reomved then [poly-A tail removed] is appended to the description of the sequence. If poly-T is removed, then [poly-T tail removed] is appended and if the sequence is reversed, [reverse complement] is appended.

Output files for usage example

File: x65923.seq

>X65923 X65923.1 H.sapiens fau mRNA [poly-A tail removed]
ttcctctttctcgactccatcttcgcggtagctgggaccgccgttcagtcgccaatatgc
agctctttgtccgcgcccaggagctacacaccttcgaggtgaccggccaggaaacggtcg
cccagatcaaggctcatgtagcctcactggagggcattgccccggaagatcaagtcgtgc
tcctggcaggcgcgcccctggaggatgaggccactctgggccagtgcggggtggaggccc
tgactaccctggaagtagcaggccgcatgcttggaggtaaagttcatggttccctggccc
gtgctggaaaagtgagaggtcagactcctaaggtggccaaacaggagaagaagaagaaga
agacaggtcgggctaagcggcggatgcagtacaaccggcgctttgtcaacgttgtgccca
cctttggcaagaagaagggccccaatgccaactcttaagtcttttgtaattctggctttc
tctaataaaaaagccacttagttcagtc

The output is a set of sequences with the poly-A (or poly-T) tails removed. If a sequence had a 5' poly-T tail then the resulting sequence is reverse-complemented by default. The description line has a comment appended about the changes made to the sequence.

Data files

None.

Notes

EST and mRNA sequences often have poly-A tails at their 3' end. Where an EST sequence is the reverse complement of a corresponding mRNA's forward sense it may have a poly-T tail at its 5' end.

trimest is not infallible. There are often repeats of A (or T) in a sequence that just happen by chance to occur at the 3' (or 5') end of the EST sequence. trimest has no way of determining if the A's it finds are part of a real poly-A tail or are a part of the transcribed genomic sequence. It removes any apparent poly-A tails that match its criteria for a poly-A tail (see "Algorithm").

References

None.

Warnings

None.

Diagnostic Error Messages

None.

Exit status

It always exits with status 0.

Known bugs

None.

See also

Program name Description
aligncopy Reads and writes alignments
aligncopypair Reads and writes pairs from alignments
biosed Replace or delete sequence sections
codcopy Copy and reformat a codon usage table
cutseq Removes a section from a sequence
degapseq Removes non-alphabetic (e.g. gap) characters from sequences
descseq Alter the name or description of a sequence
entret Retrieves sequence entries from flatfile databases and files
extractalign Extract regions from a sequence alignment
extractfeat Extract features from sequence(s)
extractseq Extract regions from a sequence
featcopy Reads and writes a feature table
featreport Reads and writes a feature table
feattext Return a feature table original text
listor Write a list file of the logical OR of two sets of sequences
makenucseq Create random nucleotide sequences
makeprotseq Create random protein sequences
marscan Finds matrix/scaffold recognition (MRS) signatures in DNA sequences
maskambignuc Masks all ambiguity characters in nucleotide sequences with N
maskambigprot Masks all ambiguity characters in protein sequences with X
maskfeat Write a sequence with masked features
maskseq Write a sequence with masked regions
newseq Create a sequence file from a typed-in sequence
nohtml Remove mark-up (e.g. HTML tags) from an ASCII text file
noreturn Remove carriage return from ASCII files
nospace Remove whitespace from an ASCII text file
notab Replace tabs with spaces in an ASCII text file
notseq Write to file a subset of an input stream of sequences
nthseq Write to file a single sequence from an input stream of sequences
nthseqset Reads and writes (returns) one set of sequences from many
pasteseq Insert one sequence into another
revseq Reverse and complement a nucleotide sequence
seqcount Reads and counts sequences
seqret Reads and writes (returns) sequences
seqretsetall Reads and writes (returns) many sets of sequences
seqretsplit Reads sequences and writes them to individual files
sirna Finds siRNA duplexes in mRNA
sizeseq Sort sequences by size
skipredundant Remove redundant sequences from an input set
skipseq Reads and writes (returns) sequences, skipping first few
splitsource Split sequence(s) into original source sequences
splitter Split sequence(s) into smaller sequences
trimseq Remove unwanted characters from start and end of sequence(s)
trimspace Remove extra whitespace from an ASCII text file
union Concatenate multiple sequences into a single sequence
vectorstrip Removes vectors from the ends of nucleotide sequence(s)
yank Add a sequence reference (a full USA) to a list file

Author(s)

Gary Williams formerly at:
MRC Rosalind Franklin Centre for Genomics Research Wellcome Trust Genome Campus, Hinxton, Cambridge, CB10 1SB, UK

Please report all bugs to the EMBOSS bug team (emboss-bug © emboss.open-bio.org) not to the original author.

History

Written (3 Oct 2001) - Gary Williams

Target users

This program is intended to be used by everyone and everything, from naive users to embedded scripts.

Comments

None