octanol |
Wiki
The master copies of EMBOSS documentation are available at http://emboss.open-bio.org/wiki/Appdocs on the EMBOSS Wiki.Please help by correcting and extending the Wiki pages.
Function
Draw a White-Wimley protein hydropathy plotDescription
octanol draws a hydropathy plot for an input protein sequence. This plots the free energy difference calculated for windows over the protein sequence, of the residues in water compared to two lipid environments: i. Octanol (equivalent to inside a lipid bilayer). ii. The interface of a synthetic lipid bilayer. Free energy differences are calculated for each position in a window of 19 residues by default, about the size of a membrane spanning alpha-helix. The energy values for each residue are summed to get two values for each window. By default, the value plotted is the free energy difference between the interface and octanol environments, which is the best indicator of the location of probable transmembrane regions. Command line options allow the display of the octanol and interface values, or hiding the difference values. The experimental free energy values for the water-interface and water-octanol transitions are read from a datafile (Ewhite-wimley.dat)
Usage
Here is a sample session with octanol
% octanol Draw a White-Wimley protein hydropathy plot Input protein sequence: tsw:opsd_human Graph type [x11]: ps Created octanol.ps |
Go to the input files for this example
Go to the output files for this example
Command line arguments
Draw a White-Wimley protein hydropathy plot Version: EMBOSS:6.4.0.0 Standard (Mandatory) qualifiers: [-sequence] sequence Protein sequence filename and optional format, or reference (input USA) [-graph] xygraph [$EMBOSS_GRAPHICS value, or x11] Graph type (ps, hpgl, hp7470, hp7580, meta, cps, x11, tek, tekt, none, data, xterm, png, gif, pdf, svg) Additional (Optional) qualifiers: -datafile datafile [Ewhite-wimley.dat] White-Wimley data file -width integer [19] Window size (Integer from 1 to 200) -plotoctanol boolean [N] Display the octanol plot -plotinterface boolean [N] Display the interface plot -[no]plotdifference boolean [Y] Display the difference plot Advanced (Unprompted) qualifiers: (none) Associated qualifiers: "-sequence" associated qualifiers -sbegin1 integer Start of the sequence to be used -send1 integer End of the sequence to be used -sreverse1 boolean Reverse (if DNA) -sask1 boolean Ask for begin/end/reverse -snucleotide1 boolean Sequence is nucleotide -sprotein1 boolean Sequence is protein -slower1 boolean Make lower case -supper1 boolean Make upper case -sformat1 string Input sequence format -sdbname1 string Database name -sid1 string Entryname -ufo1 string UFO features -fformat1 string Features format -fopenfile1 string Features file name "-graph" associated qualifiers -gprompt2 boolean Graph prompting -gdesc2 string Graph description -gtitle2 string Graph title -gsubtitle2 string Graph subtitle -gxtitle2 string Graph x axis title -gytitle2 string Graph y axis title -goutfile2 string Output file for non interactive displays -gdirectory2 string Output directory General qualifiers: -auto boolean Turn off prompts -stdout boolean Write first file to standard output -filter boolean Read first file from standard input, write first file to standard output -options boolean Prompt for standard and additional values -debug boolean Write debug output to program.dbg -verbose boolean Report some/full command line options -help boolean Report command line options and exit. More information on associated and general qualifiers can be found with -help -verbose -warning boolean Report warnings -error boolean Report errors -fatal boolean Report fatal errors -die boolean Report dying program messages -version boolean Report version number and exit |
Qualifier | Type | Description | Allowed values | Default |
---|---|---|---|---|
Standard (Mandatory) qualifiers | ||||
[-sequence] (Parameter 1) |
sequence | Protein sequence filename and optional format, or reference (input USA) | Readable sequence | Required |
[-graph] (Parameter 2) |
xygraph | Graph type | EMBOSS has a list of known devices, including ps, hpgl, hp7470, hp7580, meta, cps, x11, tek, tekt, none, data, xterm, png, gif, pdf, svg | EMBOSS_GRAPHICS value, or x11 |
Additional (Optional) qualifiers | ||||
-datafile | datafile | White-Wimley data file | Data file | Ewhite-wimley.dat |
-width | integer | Window size | Integer from 1 to 200 | 19 |
-plotoctanol | boolean | Display the octanol plot | Boolean value Yes/No | No |
-plotinterface | boolean | Display the interface plot | Boolean value Yes/No | No |
-[no]plotdifference | boolean | Display the difference plot | Boolean value Yes/No | Yes |
Advanced (Unprompted) qualifiers | ||||
(none) | ||||
Associated qualifiers | ||||
"-sequence" associated sequence qualifiers | ||||
-sbegin1 -sbegin_sequence |
integer | Start of the sequence to be used | Any integer value | 0 |
-send1 -send_sequence |
integer | End of the sequence to be used | Any integer value | 0 |
-sreverse1 -sreverse_sequence |
boolean | Reverse (if DNA) | Boolean value Yes/No | N |
-sask1 -sask_sequence |
boolean | Ask for begin/end/reverse | Boolean value Yes/No | N |
-snucleotide1 -snucleotide_sequence |
boolean | Sequence is nucleotide | Boolean value Yes/No | N |
-sprotein1 -sprotein_sequence |
boolean | Sequence is protein | Boolean value Yes/No | N |
-slower1 -slower_sequence |
boolean | Make lower case | Boolean value Yes/No | N |
-supper1 -supper_sequence |
boolean | Make upper case | Boolean value Yes/No | N |
-sformat1 -sformat_sequence |
string | Input sequence format | Any string | |
-sdbname1 -sdbname_sequence |
string | Database name | Any string | |
-sid1 -sid_sequence |
string | Entryname | Any string | |
-ufo1 -ufo_sequence |
string | UFO features | Any string | |
-fformat1 -fformat_sequence |
string | Features format | Any string | |
-fopenfile1 -fopenfile_sequence |
string | Features file name | Any string | |
"-graph" associated xygraph qualifiers | ||||
-gprompt2 -gprompt_graph |
boolean | Graph prompting | Boolean value Yes/No | N |
-gdesc2 -gdesc_graph |
string | Graph description | Any string | |
-gtitle2 -gtitle_graph |
string | Graph title | Any string | White-Wimley Plot |
-gsubtitle2 -gsubtitle_graph |
string | Graph subtitle | Any string | |
-gxtitle2 -gxtitle_graph |
string | Graph x axis title | Any string | $(sequence.name) |
-gytitle2 -gytitle_graph |
string | Graph y axis title | Any string | Total Free Energy (Kcal/mol) |
-goutfile2 -goutfile_graph |
string | Output file for non interactive displays | Any string | |
-gdirectory2 -gdirectory_graph |
string | Output directory | Any string | |
General qualifiers | ||||
-auto | boolean | Turn off prompts | Boolean value Yes/No | N |
-stdout | boolean | Write first file to standard output | Boolean value Yes/No | N |
-filter | boolean | Read first file from standard input, write first file to standard output | Boolean value Yes/No | N |
-options | boolean | Prompt for standard and additional values | Boolean value Yes/No | N |
-debug | boolean | Write debug output to program.dbg | Boolean value Yes/No | N |
-verbose | boolean | Report some/full command line options | Boolean value Yes/No | Y |
-help | boolean | Report command line options and exit. More information on associated and general qualifiers can be found with -help -verbose | Boolean value Yes/No | N |
-warning | boolean | Report warnings | Boolean value Yes/No | Y |
-error | boolean | Report errors | Boolean value Yes/No | Y |
-fatal | boolean | Report fatal errors | Boolean value Yes/No | Y |
-die | boolean | Report dying program messages | Boolean value Yes/No | Y |
-version | boolean | Report version number and exit | Boolean value Yes/No | N |
Input file format
octanol reads a single protein sequence.
The input is a standard EMBOSS sequence query (also known as a 'USA').
Major sequence database sources defined as standard in EMBOSS installations include srs:embl, srs:uniprot and ensembl
Data can also be read from sequence output in any supported format written by an EMBOSS or third-party application.
The input format can be specified by using the command-line qualifier -sformat xxx, where 'xxx' is replaced by the name of the required format. The available format names are: gff (gff3), gff2, embl (em), genbank (gb, refseq), ddbj, refseqp, pir (nbrf), swissprot (swiss, sw), dasgff and debug.
See: http://emboss.sf.net/docs/themes/SequenceFormats.html for further information on sequence formats.
Input files for usage example
'tsw:opsd_human' is a sequence entry in the example protein database 'tsw'
Database entry: tsw:opsd_human
ID OPSD_HUMAN Reviewed; 348 AA. AC P08100; Q16414; Q2M249; DT 01-AUG-1988, integrated into UniProtKB/Swiss-Prot. DT 01-AUG-1988, sequence version 1. DT 15-JUN-2010, entry version 128. DE RecName: Full=Rhodopsin; DE AltName: Full=Opsin-2; GN Name=RHO; Synonyms=OPN2; OS Homo sapiens (Human). OC Eukaryota; Metazoa; Chordata; Craniata; Vertebrata; Euteleostomi; OC Mammalia; Eutheria; Euarchontoglires; Primates; Haplorrhini; OC Catarrhini; Hominidae; Homo. OX NCBI_TaxID=9606; RN [1] RP NUCLEOTIDE SEQUENCE [GENOMIC DNA]. RX MEDLINE=84272729; PubMed=6589631; DOI=10.1073/pnas.81.15.4851; RA Nathans J., Hogness D.S.; RT "Isolation and nucleotide sequence of the gene encoding human RT rhodopsin."; RL Proc. Natl. Acad. Sci. U.S.A. 81:4851-4855(1984). RN [2] RP NUCLEOTIDE SEQUENCE [GENOMIC DNA]. RA Suwa M., Sato T., Okouchi I., Arita M., Futami K., Matsumoto S., RA Tsutsumi S., Aburatani H., Asai K., Akiyama Y.; RT "Genome-wide discovery and analysis of human seven transmembrane helix RT receptor genes."; RL Submitted (JUL-2001) to the EMBL/GenBank/DDBJ databases. RN [3] RP NUCLEOTIDE SEQUENCE [LARGE SCALE MRNA]. RC TISSUE=Retina; RX PubMed=17974005; DOI=10.1186/1471-2164-8-399; RA Bechtel S., Rosenfelder H., Duda A., Schmidt C.P., Ernst U., RA Wellenreuther R., Mehrle A., Schuster C., Bahr A., Bloecker H., RA Heubner D., Hoerlein A., Michel G., Wedler H., Koehrer K., RA Ottenwaelder B., Poustka A., Wiemann S., Schupp I.; RT "The full-ORF clone resource of the German cDNA consortium."; RL BMC Genomics 8:399-399(2007). RN [4] RP NUCLEOTIDE SEQUENCE [LARGE SCALE MRNA]. RX PubMed=15489334; DOI=10.1101/gr.2596504; RG The MGC Project Team; RT "The status, quality, and expansion of the NIH full-length cDNA RT project: the Mammalian Gene Collection (MGC)."; RL Genome Res. 14:2121-2127(2004). RN [5] RP NUCLEOTIDE SEQUENCE [GENOMIC DNA] OF 1-120. RX PubMed=8566799; DOI=10.1016/0378-1119(95)00688-5; RA Bennett J., Beller B., Sun D., Kariko K.; RT "Sequence analysis of the 5.34-kb 5' flanking region of the human RT rhodopsin-encoding gene."; [Part of this file has been deleted for brevity] FT /FTId=VAR_004816. FT VARIANT 209 209 V -> M (effect not known). FT /FTId=VAR_004817. FT VARIANT 211 211 H -> P (in RP4; dbSNP:rs28933993). FT /FTId=VAR_004818. FT VARIANT 211 211 H -> R (in RP4). FT /FTId=VAR_004819. FT VARIANT 216 216 M -> K (in RP4). FT /FTId=VAR_004820. FT VARIANT 220 220 F -> C (in RP4). FT /FTId=VAR_004821. FT VARIANT 222 222 C -> R (in RP4). FT /FTId=VAR_004822. FT VARIANT 255 255 Missing (in RP4). FT /FTId=VAR_004823. FT VARIANT 264 264 Missing (in RP4). FT /FTId=VAR_004824. FT VARIANT 267 267 P -> L (in RP4). FT /FTId=VAR_004825. FT VARIANT 267 267 P -> R (in RP4). FT /FTId=VAR_004826. FT VARIANT 292 292 A -> E (in CSNBAD1). FT /FTId=VAR_004827. FT VARIANT 296 296 K -> E (in RP4; dbSNP:rs29001653). FT /FTId=VAR_004828. FT VARIANT 297 297 S -> R (in RP4). FT /FTId=VAR_004829. FT VARIANT 342 342 T -> M (in RP4). FT /FTId=VAR_004830. FT VARIANT 345 345 V -> L (in RP4). FT /FTId=VAR_004831. FT VARIANT 345 345 V -> M (in RP4). FT /FTId=VAR_004832. FT VARIANT 347 347 P -> A (in RP4). FT /FTId=VAR_004833. FT VARIANT 347 347 P -> L (in RP4; common variant). FT /FTId=VAR_004834. FT VARIANT 347 347 P -> Q (in RP4). FT /FTId=VAR_004835. FT VARIANT 347 347 P -> R (in RP4; dbSNP:rs29001566). FT /FTId=VAR_004836. FT VARIANT 347 347 P -> S (in RP4; dbSNP:rs29001637). FT /FTId=VAR_004837. SQ SEQUENCE 348 AA; 38893 MW; 6F4F6FCBA34265B2 CRC64; MNGTEGPNFY VPFSNATGVV RSPFEYPQYY LAEPWQFSML AAYMFLLIVL GFPINFLTLY VTVQHKKLRT PLNYILLNLA VADLFMVLGG FTSTLYTSLH GYFVFGPTGC NLEGFFATLG GEIALWSLVV LAIERYVVVC KPMSNFRFGE NHAIMGVAFT WVMALACAAP PLAGWSRYIP EGLQCSCGID YYTLKPEVNN ESFVIYMFVV HFTIPMIIIF FCYGQLVFTV KEAAAQQQES ATTQKAEKEV TRMVIIMVIA FLICWVPYAS VAFYIFTHQG SNFGPIFMTI PAFFAKSAAI YNPVIYIMMN KQFRNCMLTT ICCGKNPLGD DEASATVSKT ETSQVAPA // |
Output file format
The output is to the specified graphics device.
The results can be output in one of several formats by using the command-line qualifier -graph xxx, where 'xxx' is replaced by the name of the required device. Support depends on the availability of third-party software packages.
The device names that output to a file are: ps (postscript), cps (colourps), png, gif, pdf, svg, hpgl, hp7470, hp7580, das, data.
The other available device names are: meta, x11 (xwindows), tek (tek4107t), tekt (tektronix), xterm, text.
Output can be turned off by specifying none (null).
See: http://emboss.sf.net/docs/themes/GraphicsDevices.html for further information on supported devices.
octanol draws a graph showing the free energy calcuated over a sliding window.
Output files for usage example
Graphics File: octanol.ps
The line on the default plot is the difference between the interface and octanol free energy calculations. Command line options allow the display of the interface and octanol values, or hiding the difference values.
In the example, the human opsin protein has 7 transmembrane regions: 37-61, 74-98, 114-133, 153-176, 203-230, 253-276 and 285-309. Each is about 20 residues in length, which is also the gap between tick marks on the sequence axis. All have energetic preferences for being in the lipid (octanol) enviroment - shown as being above the zero line - or have at least no clear preference.
Running octanol with all three plots:
% octanol -interface -octanol Input sequence: tsw:opsd_human Graph type [x11]:gives a graph with the water-interface and water-octanol plots.
For those regions where the diference plot is close to zero, both the other two plots are above the line, showing a preference for either the octanol or the interface membrane environments rather than water.
Data files
File Ewhite-wimley.dat contains the experimental free energy values for the water-interface and water-octanol transitions.EMBOSS data files are distributed with the application and stored in the standard EMBOSS data directory, which is defined by the EMBOSS environment variable EMBOSS_DATA.
To see the available EMBOSS data files, run:
% embossdata -showall
To fetch one of the data files (for example 'Exxx.dat') into your current directory for you to inspect or modify, run:
% embossdata -fetch -file Exxx.dat
Users can provide their own data files in their own directories. Project specific files can be put in the current directory, or for tidier directory listings in a subdirectory called ".embossdata". Files for all EMBOSS runs can be put in the user's home directory, or again in a subdirectory called ".embossdata".
The directories are searched in the following order:
- . (your current directory)
- .embossdata (under your current directory)
- ~/ (your home directory)
- ~/.embossdata
Notes
Protein sequences that form transmembrane regions are assumed to have a thermodynamic preference for a hydrophobic environment (inside the membrane lipid bilayer), rather than an aqueous environment in water. The free energy change for each amino acid residue between a lipid and a water environment can be measured experimentally, and the values for peptides can be shown to be additive (White and Wimley 1999).
For each amino acid residue in the protein, the free energy difference of the residue in lipid and water environments is measured in two ways. The first is the free energy difference between the protein in water and the protein associated with the interface (glycerol group) of a POPC (palmitoyloleoylphosphocholine) bilayer. The second is the free energy difference of the protein in water and the protein in octanol, equivalent to the environment inside a lipid bilayer.
Residues which can be buried inside a lipid bilayer must be in a region of the peptide where most residues show a free energy difference in favour of being in an octanol environment or at least being in the lipid/water interface region. White and Wimley (1999) showed that a sliding window of either free energy difference will indicate the location of probable transmembrane regions, but that the best indicator is the difference between the two values, which is the free energy difference between the interface and octanol environments.
References
- White S.H. and Wimley W.C. (1999) "Membrane protein folding and stability: physical principles" Ann. Rev.Biophys. Biomol. Struct. 28:319-365.
Warnings
None.Diagnostic Error Messages
None.Exit status
It always exits with status 0.Known bugs
None.See also
Program name | Description |
---|---|
charge | Draw a protein charge plot |
hmoment | Calculate and plot hydrophobic moment for protein sequence(s) |
iep | Calculate the isoelectric point of proteins |
pepinfo | Plot amino acid properties of a protein sequence in parallel |
pepstats | Calculates statistics of protein properties |
pepwindow | Draw a hydropathy plot for a protein sequence |
pepwindowall | Draw Kyte-Doolittle hydropathy plot for a protein alignment |
Author(s)
Ian Longden formerly at:Sanger Institute, Wellcome Trust Genome Campus, Hinxton, Cambridge, CB10 1SA, UK.
Please report all bugs to the EMBOSS bug team (emboss-bug © emboss.open-bio.org) not to the original author.